Sluice Sink

Sluice Sink

Product Code: MHP824

Description
- Model MHP824 (formerly MHP804) is our stainless steel wall mounted sluice sink (slop hopper)
- Conforms to HBN 00-10 Part C: Sanitaryware Assemblies which replaces the old HTM64 specification
- Hospital disposal unit model DU
- Manufactured from grade 304 stainless steel with a satin polished finish
- Choice of flushpipe connection - top entry for use with exposed cistern or back entry for use with concealed cistern
- 110mm plain spigot outlet with the option of white polypropylene P or S trap
- The sluice sink is manufactured with an anti drip edge and turn down to all four sides
- Full flushing rim to ensure efficient and hygienic flushing
- All sluice sinks are supplied with wall mounting brackets with the option of front support legs
- Overall size 600mm x 600mm
- The slop hoppers are predominantly used in hospitals and care homes

Top Entry Model
- For a limited time comes with a grating as standard
- Tap hole drilling not available
- Optional plastic or exposed stainless steel manual cistern with operating lever available 

Back Entry Model
- Grating not included as standard
- Tap hole drilling option available if required, see below:
- No tap hole
- Single left or right hand tap hole for lever mixer swivel tap (product code TVS6743LQMMT)
- Fixing holes for stainless steel hinged grid (product code MHP-GRID)
Please note if you have a tap hole you cannot have a grid. It is one or the other.
- Optional concealed plastic manual cistern with operating lever and flushpipe available

Delivery
- From stock, usually 1 to 3 working days

Sluice Sink Dimensions
- Height: 400mm
- Overall length: 600mm
- Front to back: 600mm

Cistern Dimensions
- Concealed: 505mm (W) x 312mm (H) x 150mm (D)
- Exposed: 455mm (W) x 318mm (H) x 155mm (D)

Optional Extras
- MHP-FL - front support legs
- SA-KWCCISTERN & SA-KWCFLUSHP - plastic exposed cistern and downpipe, lever operated - sold with MHP824 top entry unit with grating only
- WC142-LL-WL - plastic concealed cistern and downpipe, lever operated
- POLYPTRAP - 4" polypropylene P trap
- POLYSTRAP - 4" polypropylene S trap
- MHP-STRAINER - stainless steel sluice sink outlet strainer

FOR ANY ENQUIRIES OR QUOTES PLEASE CONTACT US ON 01452 721211 OR SEND US AN EMAIL TO [email protected]

Plastic Concealed Cistern with Lever image

Plastic Concealed Cistern with Lever

Ref No: WC142-LL-WL

Plastic manual WC cistern for concealed duct mounting

More details

Plastic Concealed Cistern with Push Button image

Plastic Concealed Cistern with Push Button

Ref No: WC142-LL-AIR-50

Plastic manual WC cistern for concealed duct mounting with push button

More details

4

4" Polypropylene 'S' Trap

Ref No: POLYSTRAP

'S' trap for use with our slop hoppers, WC squatting pans and similar products

More details

4

4" Polypropylene 'P' Trap

Ref No: POLYPTRAP

'P' trap for use with our WC squatting pans, slop hoppers and similar products

More details

Our products are tested and certified to meet applicable standards. Not all products are covered by the same standards.
Products maunfactured outside the EU may have been tested to local standards which may meet or exceed EU standards.
Acorn Thorn Limited is registered in England & Wales no. 3094490. The registered address is as shown above. VAT registration no: (GB) 656 1212 55
Ecommerce Web Site Design by Net Digital Bristol