Inset Wash Basin

Inset Wash Basin

Product Code: 251

Model 251 is a wash basin designed for fitting into countertops up to 50 mm thick. Fixing toggles are supplied for securing the wash basin in position.

The inset wash basin is manufactured in one piece without joints or crevices from grade 304 stainless steel, with all exposed surfaces polished to a satin finish. The wash basin is produced with two tap holes and is supplied as standard with a combined waste and overflow fitting, plug and chain and fixing toggles. Taps shown are for illustration purposes only and are not included. Please refer to our taps pages for suitable taps.

Special Features 

HYGIENIC VANDAL RESISTANT DESIGN
COMPLETE WITH FIXING TOGGLES

Lever Operated Basin Taps - Quarter Turn   image

Lever Operated Basin Taps - Quarter Turn

Ref No: 6721LQBPHC

Quarter turn ceramic disc for rapid on/off flow. Lever Operated

More details

Deck Mounted Sensor Spout  image

Deck Mounted Sensor Spout

Ref No: 6950SOBSP

Available as a kit for 1, 2 or 3 users - Battery or Mains Operated

More details

Inset Wash Basin - Round With Tap Landing image

Inset Wash Basin - Round With Tap Landing

Ref No: 255

Stainless steel round inset wash basin, two tap holes, 385mm overall diameter

More details

Inset Wash Bowl 310mm Overall Diameter  image

Inset Wash Bowl 310mm Overall Diameter

Ref No: 256

Stainless steel round inset wash bowl, no tap holes, 310mm overall diameter

More details

Our products are tested and certified to meet applicable standards. Not all products are covered by the same standards.
Products maunfactured outside the EU may have been tested to local standards which may meet or exceed EU standards.
Acorn Thorn Limited is registered in England & Wales no. 3094490. The registered address is as shown above. VAT registration no: (GB) 656 1212 55
Ecommerce Web Site Design by Net Digital Bristol