Floor Recessed Slab Urinal

Floor Recessed Slab Urinal

Product Code: UR066

- Model UR066 is a stainless steel floor recessed slab urinal
- Manufactured from 1.2mm thick grade 304 stainless steel
- End panels suitable for leaving exposed or butting against side walls
- Vandal resistant square horizontal sparge pipe flushing system
- Manufactured to order in bespoke lengths up to 3300mm
- Top entry connection for exposed stainless steel cistern and downpipe (supplied)
- Optional back entry connection for a concealed cistern and downpipe (supplied)
- L and U shape urinals with optional corner infill panel(s)

Each Urinal Includes
- Left, right or central 38mm (1.5”) waste fitting
- Stainless steel auto cistern (9.0L)
- Stainless steel downpipe

Delivery
- Made to order, usually 15 to 20 working days

Dimensions
- Height including recessed section: 1150mm
- Projection: 300mm
- Length: up to 3300mm in one piece
- Cistern: 455mm long x 126mm projection x 280mm high

Optional Extras
MWB-B/M - marnic water watch flush controller, battery or mains operated
UR066-DPC - stainless steel downpipe cover
UR066-CS - corner infill panel for L and U shape urinals
UR066-JCT - joint cover trim for adjacent urinals

FOR ANY ENQUIRIES OR QUOTES PLEASE CONTACT US ON 01452 721211 OR SEND US AN EMAIL TO [email protected]

 

Marnic Water Watch Flush Controller image

Marnic Water Watch Flush Controller

Ref No: MWB

Urinal flush controller with mains or battery operation. Up to 90% saving in water usage. Maximum of 3 flushes per hour in busy times. Can be set to flush once every 12 or 24 hours in times of no use.

More details

Floor Standing Slab Urinal image

Floor Standing Slab Urinal

Ref No: UR067

Made to order up to 3300mm long, includes stainless steel cistern and waste fitting

More details

Pre-Drilled Wall Mounted Wash Trough image

Pre-Drilled Wall Mounted Wash Trough

Ref No: WE310

Stock stainless steel wash trough with pre-drilled tap holes

More details

Compact Wash Basin image

Compact Wash Basin

Ref No: WE245

Stainless steel compact wash basin, two tap holes, 340mm(W)x340mm(L)x160mm(H)

More details

Our products are tested and certified to meet applicable standards. Not all products are covered by the same standards.
Products maunfactured outside the EU may have been tested to local standards which may meet or exceed EU standards.
Acorn Thorn Limited is registered in England & Wales no. 3094490. The registered address is as shown above. VAT registration no: (GB) 656 1212 55
Ecommerce Web Site Design by Net Digital Bristol