Pre-Drilled Wall Mounted Wash Trough

Pre-Drilled Wall Mounted Wash Trough

Product Code: WE310

  • Pre-Drilled Wall Mounted Wash Trough
  • Pre-Drilled Wall Mounted Wash Trough
  • Pre-Drilled Wall Mounted Wash Trough
  • Pre-Drilled Wall Mounted Wash Trough
  • Pre-Drilled Wall Mounted Wash Trough

No documents uploaded.

Description

- This is now being replaced with model WE309
- Limited sizes and quantities still available
- Model WE310 is a wall mounted wash trough constructed from grade 304 stainless steel, 1.5mm thick
- Tap holes are pre-drilled for single 35mm tap holes per user
- The tap holes will be suitable for most mixer, infrared, time flow and the traditional lever or cross head taps
- Cost effective solution for providing multiple hand washing facilities than traditional basins
- For heavy duty use

Includes

- Integral wall mounting points.
- Centre 38mm flush grated waste fitting included (no plug or overflow)
- Pre-drilled tap holes for single 35mm tap hole per user

Delivery

- Stock item – 1 to 2 working day lead time

Dimensions

This wash trough can be supplied at different lengths.

- Lengths available: 2500mm
- Height: 150mm
- Front to back: 400mm
- Rear upstand: 25mm
- Tap Ledge: 70mm

Pre-drilled tap holes

- 2500mm length – five 35mm tap holes

Where can this be installed?

- This wash trough is ideal for locations where multiple users require hand washing facilities at the same time
- Can be installed inside or outside
- Ideal for nurseries, schools, colleges, factories etc
- If being installed in an environment where people may lean or sit on the trough, we recommend purchasing a pair of front support legs (see below) for extra support holding the wash trough up

Optional Extras

WE-STANDARD-FL - Stainless steel front support legs (950mm unit height)
WE-NURSERY-LEGS - Stainless steel front support legs (600mm unit height)
LARGE-PLASTIC-BOTTLETRAP – 1.5" plastic bottle trap
LARGE-CHROME-BOTTLETRAP – 1.5" chrome plated bottle trap
TAPS AVAILABLE FROM OUR EXTENSIVE RANGE
POWDER COATED FINISH AVAILABLE UPON REQUEST

FOR ANY ENQUIRIES OR QUOTES PLEASE CALL US ON 01452 721211 OR SEND US AN EMAIL TO [email protected]

1.5

1.5" Plastic Bottle Trap

Ref No: LARGE-PLASTIC-BOTTLETRAP

1.5" (38mm) plastic bottle trap for use with urinals, wash troughs and bucket sinks.

More details

1.5

1.5" Chrome Plated Bottle Trap

Ref No: LARGE-CHROME-BOTTLETRAP

1.5" (38mm) chrome plated brass bottle trap for use with urinals and wash troughs

More details

Lever Operated Basin Taps With 3

Lever Operated Basin Taps With 3" Levers

Ref No: TVS6721LQBPHC

Quarter turn ceramic disc for rapid on/off flow, lever operated

More details

Our products are tested and certified to meet applicable standards. Not all products are covered by the same standards.
Products maunfactured outside the EU may have been tested to local standards which may meet or exceed EU standards.
Acorn Thorn Limited is registered in England & Wales no. 3094490. The registered address is as shown above. VAT registration no: (GB) 656 1212 55
Ecommerce Web Site Design by Net Digital Bristol