Knee Operated Wash Trough

Knee Operated Wash Trough

Product Code: WE503

  • Knee Operated Wash Trough
  • Knee Operated Wash Trough
  • Knee Operated Wash Trough
  • Knee Operated Wash Trough
  • Knee Operated Wash Trough
  • Knee Operated Wash Trough

No documents uploaded.

Description

- Model WE503 is a knee operated, wall mounted, hand washing trough
- Wash trough with hands free operation using time flow knee valves and fixed deck spouts to prevent cross contamination
- Constructed from grade 304 stainless steel, 1.6mm thick for heavy duty use and extra vandal resistance
- Available from stock in 8 standard sizes: 500mm for 1 user, 1000mm and 1200mm for 2 users, 1500mm and 1800mm for 3 users, 2000mm and 2400mm for 4 users and 2500mm for 5 users
- Knee valves are chrome plated with 15mm compression fittings and time flow set for approx. 15 seconds at 3 bar water pressure
- Fixed basin spouts are chrome plated (interconnecting pipework shown but not supplied)
- Cost effective solution for providing multiple hand washing facilities than traditional basins
- Taps and knee valves will need to be installed on site

Package Includes

- WE305 stainless steel wall mounted wash trough c/w centre 38mm (1.5") flush grated waste fitting included (no plug or overflow)
- TVS6831TKV chrome plated knee valve per user
- TVS6912DSP chrome plated fixed basin spout per user

Delivery

- In stock, usually 2 to 3 working days

Dimensions

This wash trough can be supplied at different lengths.

Lengths available: 500mm | 1000mm |1200mm | 1500mm | 1800mm | 2000mm | 2400mm | 2500mm
Height: 150mm
Front to back: 400mm
Rear upstand: 75mm
Tap Ledge: 70mm

Where can this be installed?

- This wash trough is ideal for locations where multiple users require hand washing facilities at the same time.
- Can be installed inside or outside
- Ideal for schools, colleges, factories etc
- If being installed in an environment where people may lean or sit on the trough, we recommend purchasing a pair of front support legs (see below) for extra support holding the wash trough up

Optional Extras

WE-STANDARD-FL - Stainless steel front support legs (950mm unit height)
LARGE-PLASTIC-BOTTLETRAP – 1.5" plastic bottle trap
LARGE-CHROME-BOTTLETRAP – 1.5" chrome plated bottle trap
WE305-TPCVR - Stainless steel trap cover
TAPS AVAILABLE FROM OUR EXTENSIVE RANGE
POWDER COATED FINISH AVAILABLE UPON REQUEST

FOR ANY ENQUIRIES OR QUOTES PLEASE CALL US ON 01452 721211 OR SEND US AN EMAIL TO [email protected]

1.5

1.5" Chrome Plated Bottle Trap

Ref No: LARGE-CHROME-BOTTLETRAP

1.5" (38mm) chrome plated brass bottle trap for use with urinals and wash troughs

More details

1.5

1.5" Plastic Bottle Trap

Ref No: LARGE-PLASTIC-BOTTLETRAP

1.5" (38mm) plastic bottle trap for use with urinals, wash troughs and bucket sinks.

More details

Wash Trough Trap Cover image

Wash Trough Trap Cover

Ref No: WE305-TPCVR

Stainless steel trap cover to suit 400mm projection wash troughs

More details

Our products are tested and certified to meet applicable standards. Not all products are covered by the same standards.
Products maunfactured outside the EU may have been tested to local standards which may meet or exceed EU standards.
Acorn Thorn Limited is registered in England & Wales no. 3094490. The registered address is as shown above. VAT registration no: (GB) 656 1212 55
Ecommerce Web Site Design by Net Digital Bristol